features excellent appearance slim font design mitered corners, evenly illuminated segments gray face for optimum on/off contrast choice of colors: green choice of character size: 10 mm (0.4 inch) characterized for luminous intensity description the 10 mm (0.4 inch) three digit slim font with 2- colons seven segment displays incorporates a new slim font character design. this slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. faces of these displays are painted a neutral gray for enhanced on/off contrast. all devices are available in either common anode or common cathode configuration with tinted green segments. devices green description HDSP-431G 3 digit, common anode, untinted- diffused, 0.4" display hdsp-433g 3 digit, common cathode, untinted- diffused, 0.4" display qdsp-499g 3 digit, common anode, untinted- diffused, 0.4" display, without pin 6 and no dp. HDSP-431G/433g qdsp-499g 10 mm three digit slim font with 2-colons seven segment displays data sheet
2 part numbering system 5082 - x xx x - x x x xx hdsp - x xx x - x x x xx mechanical options [1] 00: no mechanical option color bin options [1,2] 0: no color bin limitation maximum intensity bin [1,2] 0: no maximum intensity bin limitation minimum intensity bin [1,2] 0: no minimum intensity bin limitation device configuration/color [1] g: green device specific configuration [1] refer to respective data sheet package [1] refer to respective data sheet notes: 1. for codes not listed in the figure above, please refer to the respective data sheet or contact your nearest avago representat ive for details. 2. bin options refer to shippable bins for a part-number. color and intensity binbs are typically restricted to 1 bin per tube ( exceptions may apply). please refer to respective data sheet for specific bin limit information.
3 package dimensions (HDSP-431G/hdsp-433g/qdsp-499g) notes: 1. all dimensions are in millimeters (inches). 2. unless otherwise stated, tolerances are ?0.25 mm. 6.00 (0.236) 10.00 10.16 (0.400) x 2 (0.800) date code color bin front view luminous intensity category country of origin pin 1 6 ? ? 1.20 (0.047) 10.00 (0.394) hdsp-xxxx yww xz coo top side 30.02 (1.182) 6.00 (0.236) 7.00 (0.276) 12.80 (0.504) 10.16 (0.400) 3.90 ?0.50 (0.154) right side bottom side a d l b c f e g dp1 pin 15 dp2 dp3 l2 l3 digit 1 digit 2 digit 3 2.54 x 7 (0.700) note: qdsp-499g does not have pin 6 and therefore dp1, dp2, and dp3 are not displayed. pin 6 pin 11 ? ? 0.45 (0.018) pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 function digit 1 common a/c e c d digit 2 common a/c dp digit 3 common a/c g no pin no pin b a no pin l1, l2, & l3 common a/c f
4 absolute maximum ratings at t a = 25?c description green units average power per segment or dp 65 mw peak forward current per segment or dp 100 ma dc forward current per segment or dp 25 ma operating temperature range ?0 to +105 ?c storage temperature range ?0 to +105 ?c reverse voltage per segment or dp 3 v wave soldering temperature for 3 seconds 1.59 mm below body 250 ?c note: 1. derate above 40?c at 0.33 ma/?c for green. electrical/optical characteristics at t a = 25?c device series parameter symbol min. typ. max. units test conditions HDSP-431G/ luminous intensity/ i v 3.200 5.000 mcd i f = 10 ma hdsp-433g/ segment (digit qdsp-499g a verage) forward voltage/ v f 2.25 2.50 v i f = 20 ma segment or dp peak wavelength peak 568 nm i f = 20 ma dominant wavelength d 573 nm i f = 20 ma reverse current i r 100 av r = 5 v notes: 1. typical specification for reference only. do not exceed absolute maximum ratings. 2. the dominant wavelength, , is derived from the cie chromaticity diagram and is that single wavelength which defines the color of the device. internal circuit diagram (common cathode) internal circuit diagram (common anode) 1 com 5 com 7 com a 12 b 11 c 3 d 4 e 2 f 15 g 8 dp 6 14 digit 1 digit 2 digit 3 l1 l2 l3 note: qdsp-499g does not have pin 6 connected. 1 com 5 com 7 com a 12 b 11 c 3 d 4 e 2 f 15 g 8 dp 6 14 digit 1 digit 2 digit 3 l1 l2 l3 note: qdsp-499g does not have pin 6 connected.
5 HDSP-431G/433g/qdsp-499g iv bin category min. max. l 3.200 5.050 m 5.051 8.000 intensity bin limits (mcd) green dominant wavelength (nm) color bin min. max. green 3 570.0 574.0 4 567.0 571.0 color categories note: 1. all categories are established for classification of products. products may not be available in all categories. please contact your avago representatives for further clarification/information. contrast enhancement for information on contrast enhancement, please see application note 1015. soldering/cleaning cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlori- nated hydrocarbon family (meth- ylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning led parts. all of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic led parts. for information on soldering leds, please refer to application note 1027. figure 1. maximum allowable dc current vs. ambient temperature. figure 2. forward current vs. forward voltage. figure 3. relative luminous intensity vs. dc forward current. i dc maximum dc current per segment ma 20 0 t a ambient temperature c 30 90 120 40 30 70 50 green 10 20 5 15 25 35 40 60 80 100 110 r j-a = 770 c/w i f forward current per segment ma 0 0 v f forward voltage v 100 50 35 70 20 14 30 green 2 80 10 40 60 90 relative luminous intensity (normalized to 1 at 10 ma for green) 0 0 i f dc forward current ma 8 6 4 2 20 10 30 green 51525
for product information and a complete list of distributors, please go to our website: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies limited in the united states and other countries . data subject to change. copyright ? 2007 avago technologies limited. all rights reserved. obsoletes 5989-4063en av02-0130en january 24, 2007
|
